https://www.selleckchem.com/
This paper reports on the fabrication of 1-3 piezocomposite with hexagonal pillars for high frequency ultrasonic transducer based on the cold ablation technique. The piezocomposite with hexagonal pillars was designed, simulated, and fabricated using an ultraviolet picosecond laser. It performs better than the piezocomposite with other pillar shapes like square. The edge length and height of the hexagonal PZT pillar were 10 μm and 36 μm, the width of the kerf was about 5 μm. The 1-3 piezocomposite with a resonance frequency of 51.2 MHz and a coupling coeffic
Like
Comment
Share
