https://www.selleckchem.com/pr....oducts/gusacitinib.h
However, there was a significant decrease in elongation and tensile strength because grain boundaries act as critical defects. Next, the annealing time was varied from 0.5 to 6 h for a better understanding of the effects of the annealing time. As a result, the maximum elongation (0.54 ± 0.03%) and tensile strength (589 ± 11 MPa) were obtained at 150 °C for 1 h. Annealing for 1 h was appropriate for sufficient defect reduction; however, excessive annealing for more than 1 h increased the degree of partial crystallization of the ITO t
Like
Comment
Share
